Demig DE-CP 542-01 系列
兼容 & 易通信
过程控制器DE-CP 54X-01系列是我们之前系列（从DE-VR 4008系列）开始的完全替换品! 它最好的地方是什么?
由于集成的ECB bus, 你仍然可以使用现在控制柜开孔来安装DE-CP 542-01. 得益于改进的冷却设计，操作温度已被显著降低了! 此外, 系统由一个集成的UPS进行保护，这确保了在电源故障后可控的关机。
集成的ProfiBus模块用于ProfiBus-兼容硬件 (主站或子站均可)!
用户界面确保用户可以简洁直观的在15英寸显示上监视和操作工艺。
整个系统由一个强大的处理器驱动，可流畅显示复杂的可视化界面。
顺控程序通过预组态的工艺段进行编程。操作员能自动地被引导进行必要的输入和数据。例如监视和安全功能等程序段依赖基本设定已经存储在系统组态中。
您的优势一览
功能描述
操作
- 通过触摸屏进行简单直观的菜单引导操作
- 面向工艺编程
- 通过菜单切换语言
- 系统制造商的单独组态选项
技术
- 得益于高分辨率彩色显示屏实现便捷的流程可视化
- 强大的处理器使控制和图像生成快速响应
- 通过2.5 GbE以太网兼容网络
- 使用DE-CP XX2-01 实现Profibus (子站/主站) 连接
- 使用DE-CP X24-01 实现Profinet (子站/主站) 连接
- 用于监视和维修的远程通信
- 用于整个系统数字量和模拟量输出的看门狗功能
- 面板安装外壳，IP65前密封，IP20后密封
数据记录
- 记录所有过程变量
- 集成记录仪功能
- 图形或数字式数据展示
- 打印功能
- DIN ISO 9000质量体系认证
调节
- 多系统控制
- 所有标准控制算法带参数切换和设定值校准
- 特殊功能 (e.g. 扩散控制, F-值计算)
控制系统
- 集成PLC (兼容S5 © and S7 © )
- 手动操作模式
- 分步控制
- 特殊功能 (e.g. 烧嘴循环控制)
可视化
- 系统图形带装态显示
- 警报和消息显示带帮助功能
- 在线数字化过程变量显示和趋势显示
技术参数
显示和操作
- 15" TFT 带集成触摸屏
- 分辨率 1024×768 像素 XGA 分辨率
- 可连接外部USB鼠标和/或键盘
- 直观的图形用户界面
保护等级
- 前面板 IP65
- 后面 IP20
- 环境温度 0...+45°C
EMV
- 辐射标准EN 61000-6-4:2007 + A1:2011
- 抗干扰等级 EN 61000-6-2:2005
系统
- Intel® Dual Core 2 GHz
- 4GB DDR4 内存
- 40GB M.2 闪存
- 包含程序、测量值和工艺状态的所有数据保存在闪存中
- UPS 确保数据完整性
- 多级看门狗，系统状态、电压和温度监视
- 实时时钟 RTC, 备份电池
- 集成 PLC, S5 © and S7 © 指令集, 最大PLC程序长度: 60,000 指令，1,000 位指令时间0.2ms< 至多256计时器, 1024消息, 1024警报 (可选开延时)
DE-CP XX2-01接口
- 2x 2.5GbE带TSN 以太网口
- 1 COM DE9 DIN-RS232 (电位隔离)
- 额外的 COM DE9 DIN-RS232/RS422/RS485 externally expandable
- 1x USB 3.1 Gen.2 Type C
- 2x USB 3.1 Gen.2 Type A
- 1x USB Demig IO
- Profibus DP (主站或子站), RS-485, potential-free, D-Sub socket, 9-pin
- 多协议集成: e.g. ModBus TCP and RTU
DE-CP X4X-01电源
本体和I/O使用独立电源
- 24V DC ± 15% (Main)
- 电源 (本体) 典型值 25W, max. 75W 当超级电容UPS在充电时
- 24V DC ± 15% (I/O)
- 外部 (I/O) 典型值 10-20W, max. 50W
- 电位隔离 GND/PE
- 超级电容UPS后备
DE-CP 54X-01 外形尺寸和重量
- 面板尺寸约 15". 395x318x4mm
- 开孔尺寸 15" 379x302mm 或 284x137mm (带适配框)
- 安装深度h: 约 235mm (270mm 带插头)
- 最大安装面板厚度 6mm
- 重量 15" 约 7.1 kg
附件
- 8 模拟量输出卡
- 8 Analog OUT card
- 4 模拟量输入 / 2 模拟量输出
- 4 模拟量输入/2 模拟量输出 (可切换输出)
- 32 Digital IN card
- 32 数字量输入卡 / 32 数字量输入-输出卡
- 24 数量量输入 / 16 数字量输出卡
8 Analog IN Karte
Artikelnummer: 601613
8-fold analog input card
- All inputs are galvanically isolated from each other and from the system potential
- DC voltage, DC current measurement possible
- Inputs configurable: 0...100mV 0...500mV
- 0...2V 0...10V
- 0...20mA
- 0...400 Ω (2/3/4-wire technology)
- (error < 0.1% of the measuring range)
- Any combination of input circuitry
- min. Measuring time per channel 20mS
- Double reference junction measurement in the connector plug
Linearization is included in the scope of delivery for the following thermocouples.
- Cu-CuNi Type U ( -200 ... +600 °C)
- Fe-CuNi Type L ( -200 ... +900 °C)
- NiCr-CuNi Type E ( 0 ... +1000 °C)
- Ni-CrNi Type K ( -200 ... +1370 °C)
- PtRh-AuPdPt ( -100 ... +1300 °C)
- PtRh13-Pt Type R ( 0 ... +1740 °C)
- PtRh10-Pt Type S ( 0 ... +1760 °C)
- PtRh30-PtRh6 Type B ( 0 ... +1800 °C)
- WRe3-WRe25 ( 0 ... +2400 °C)
- WRe3-WRe26 ( 0 ... +2500 °C)
- NiCrSi-NiSi Type N ( -270 ... +1400 °C)
- Pt 100 ( -200 ... +800 °C)
8 Analog OUT Karte
Artikelnummer: 601615
DA 8: 8-fold analog output card
- All outputs are galvanically isolated from the system potential
- Outputs: 0...10V load capacity >= 1kΩ
- 0(4)...20mA Load <= 1000 Ω
- Resolution 12 bit/0.025%
- Output rate dependent on configuration (min. every 100ms)
- Local watchdog function integrated
4 Analog IN / 2 Analog OUT Karte
Artikelnummer: 601614
AD 4/DA 2: Analog combination card
Analog inputs (4):
- All inputs are galvanically isolated from each other and from the system potential
- DC voltage, DC current measurement possible
- Inputs configurable: 0...100mV 0...500mV
- 0...2V 0...10V
- 0...20mA
- 0...400 Ω (2/3/4-wire technology)
- (error < 0.1% of the measuring range)
- Any combination of input wiring via configuration software
- min. Measuring time per channel 20mS
- Cold junction measurement in the connector plug
Linearization is included in the scope of delivery for the following thermocouples:
- Cu-CuNi Type U ( -200 ... +600 °C)
- Fe-CuNi Type L ( -200 ... +900 °C)
- NiCr-CuNi Type E ( 0 ... +1000 °C)
- Ni-CrNi Type K ( -200 ... +1370 °C)
- PtRh-AuPdPt ( -100 ... +1300 °C)
- PtRh13-Pt Type R ( 0 ... +1740 °C)
- PtRh10-Pt Type S ( 0 ... +1760 °C)
- PtRh30-PtRh6 Type B ( 0 ... +1800 °C)
- WRe3-WRe25 ( 0 ... +2400 °C)
- WRe3-WRe26 ( 0 ... +2500 °C)
- NiCrSi-NiSi Type N ( -270 ... +1400 °C)
- Pt 100 ( -200 ... +800 °C)
Analog outputs (2):
- All outputs are galvanically isolated from the system potential
- Outputs: 0...10V load capacity >=1kΩ
- 0(4)...20mA Load <= 500 Ω
- Resolution 12 bit/ 0.025%
- Output rate dependent on configuration (min. every 100ms)
- Local watchdog function integrated
4 Analog IN / 2 Analog OUT Karte (Schaltausgang)
Artikelnummer: 601616
AD 4/DA 2: Analog combination card with limit value switch
Analog inputs (4):
- All inputs are galvanically isolated from each other and from the system potential
- DC voltage, DC current measurement possible
- Inputs configurable: 0...100mV 0...500mV
- 0...2V 0...10V
- 0...20mA
- 0...400 Ω (2/3/4-wire technology)
- (error < 0.1% of the measuring range)
- Any combination of input wiring via configuration software
- min. Measuring time per channel 20mS
- Cold junction measurement in the connector plug
Linearization is included in the scope of delivery for the following thermocouples:
- Cu-CuNi Type U ( -200 ... +600 °C)
Fe-CuNi Type L ( -200 ... +900 °C)
NiCr-CuNi Type E ( 0 ... +1000 °C)
Ni-CrNi Type K ( -200 ... +1370 °C)
PtRh-AuPdPt ( -100 ... +1300 °C)
PtRh13-Pt Type R ( 0 ... +1740 °C)
PtRh10-Pt Type S ( 0 ... +1760 °C)
PtRh30-PtRh6 Type B ( 0 ... +1800 °C)
WRe3-WRe25 ( 0 ... +2400 °C)
WRe3-WRe26 ( 0 ... +2500 °C)
NiCrSi-NiSi Type N ( -270 ... +1400 °C)
Pt 100 ( -200 ... +800 °C)
Analog outputs (2):
- All outputs are galvanically isolated from the system potential
- Outputs: 0...10V load capacity >=1kΩ
- 0(4)...20mA Load <= 500 Ω
- Resolution 12 bit/ 0.025%
- Output rate dependent on configuration (min. every 100ms)
- Local watchdog function integrated
Comparator inputs (2):
- The two inputs 0...10V are at the potential of the analog outputs and are compared internally.
- Potential-free relay output switches depending on the result of the comparator.
32 Digital IN Karte
Artikelnummer: 601611
IN 32: 32-fold digital input card
- All inputs are galvanically isolated from the system potential by optocouplers
- Input potentials 0 V...30V (DC) 15mA; logical 0 < 5V logical 1 > 15V
- Hardware debouncing of all inputs, min. signal length 200ms (other signal lengths possible on request)
32 Digital OUT Karte / 32 Digital IN-OUT Karte
Artikelnummer: 601612
OUT 32/IO 32: 32-fold digital input/output card
- all outputs can also be configured as inputs
- all outputs and inputs are galvanically isolated from the system potential by optocouplers
- Switching capacity per output max. 30V / max. 0.5A at max. 12W (ohmic load)
- external power supply of the output transistors 24V DC ± 15%
- Local watchdog function integrated
- Input potentials 0 V...30V (DC); logical 0 < 5V logical 1 > 15V
- Hardware debouncing of all inputs, signal length optionally 1.6 ms/0.14ms (longer or shorter signal length possible on request)
24 Digital IN / 16 Digital OUT Karte
Artikelnummer: 601608
IN 24/OUT 16: 24-fold IN/16-fold OUT card
- All inputs are galvanically isolated from the system potential by optocouplers
- Input potentials 0 V...30V (DC) 15mA; logical 0 < 5V logical 1 > 15V
- Hardware debouncing of all inputs, min. signal length 200ms (other signal lengths possible on request)
- All outputs can be loaded with 0.5A (all outputs can be switched on at the same time)
- Short-circuit resistance of all outputs
- Supply voltage 18VDC...36VDC
- Local watchdog function integrated
- Outputs are switched off when the supply voltage is < 16V
